Category: Technical blog

Posted on

Appam and Egg Masala

Appam and Egg Masala

appam

Appam and Egg Masala
Ingredient 1 – mustard seeds, onion, ginger , garlic, curry leaves, red chilly powder, turmeric, salt
Ingredient 2 – boiled eggs.
– heat oil in sauce pan and put ‘Ingredient 1’ in the same order.
– pour little water after 5 minutes cooking and add Ingredient 2 .
– Cook it in low flame for 20 minutes
Appam
Ingredient 1 – mustard seeds, onion, ginger , garlic, curry leaves, red chilly powder, turmeric, salt
Ingredient 2 – boiled eggs.
– heat oil in sauce pan and put ‘Ingredient 1’ in the same order.
– pour little water after 5 minutes cooking and add Ingredient 2 .
– Cook it in low flame for 20 minutes

Note: for complete list of recipes – please click on recipes
Disclaimer: Some people will be allergenic to certain food products mentioned above – please use your judgment and consult with health experts before you prepare and consume it. We shall not be responsible for the outcome of any recipe anyone try from this website.

Posted on

Fish bake

Fish bake

fish

Ingredient 1 – chopped onion, ginger , garlic, curry leaves, red chilly powder, turmeric, salt
Ingredient 2 – cleaned whole Mackerel
– mix ‘Ingredient 1’ in the backing pan.
– add Mackeral to the backing pan.
– pre-heat oven in 350 Fahrenheit
– put the pan in Oven and bake it for 30-40 min.

Note: for complete list of recipes – please click on recipes

Disclaimer: Some people will be allergenic to certain food products mentioned above – please use your judgment and consult with health experts before you prepare and consume it. We shall not be responsible for the outcome of any recipe anyone try from this website.

Posted on

Egg Masala

Egg Masala

eggmasala
Ingredient 1 – mustard seeds, onion, ginger , garlic, curry leaves, red chilly powder, turmeric, salt
Ingredient 2 – boiled eggs.
– heat oil in sauce pan and put ‘Ingredient 1’ in the same order.
– pour little water after 5 minutes cooking and add Ingredient 2 .
– Cook it in low flame for 20 minutes

Note: for complete list of recipes – please click on recipes
Disclaimer: Some people will be allergenic to certain food products mentioned above – please use your judgment and consult with health experts before you prepare and consume it. We shall not be responsible for the outcome of any recipe anyone try from this website.

Posted on

Mahi mahi fish curry

Mahi mahi fish curry

mahi1

Ingredient 1 – mustard seeds, onion, ginger , garlic, curry leaves, red chilly powder, turmeric, salt
Ingredient 2 – black tamarind, asafoetida , fenugreek powder

– heat oil in sauce pan and put ‘Ingredient 1’ in the same order.
– pour little water after 5 minutes cooking and add Ingredient 2 .
– after the contents get boling,put the mahi mahi fish cubes in it and cook it in low flame for 20 minutes

Note: for complete list of recipes – please click on recipes

Disclaimer: Some people will be allergenic to certain food products mentioned above – please use your judgment and consult with health experts before you prepare and consume it. We shall not be responsible for the outcome of any recipe anyone try from this website.

Posted on

Lobster recipe

Lobster recipe

lobster

Grilled Lobster recipe

Ingredient 1 – Black pepper, red chilies, coriander powder, garam masala ,lemon juice, salt and olive oil. Make a paste.

– Pre-heat oven to 400 Fahrenheit.
– Boil whole lobster in turmeric water and salt for 5 min. Cool it. Then make a cut on lower side of Lobster to expose flesh as well as remove unwanted things.
– bush the ingredient 1 to exposed lobster flesh
– grill it for max 5 min.

Note: for complete list of recipes – please click on recipes

Disclaimer: Some people will be allergenic to certain food products mentioned above – please use your judgment and consult with health experts before you prepare and consume it. We shall not be responsible for the outcome of any recipe anyone try from this website.

Posted on

Stuffed Mussels

Stuffed Mussels

stuffedmussels

Yummy Keralian Fried Stuffed Mussels /arikadukka

Fried Stuffed Mussels /arikadukka is a South Indian – Kerala recipe, there could be other ways to prepare this.

ingredient 1 – Grind and mix the onions or shallots, grated coconut, curry leaves, fennel seeds, green / red chilies, ginger, and garlic
ingredient 2 – mix salt water to rice powder and make a paste mixture (add salt to taste)
ingredient 3 – mix olive oil and turmeric powder, corriander powder, red chilli powder, rice powder and salt and make a spicy mixture. You can add any other powders like garam masala, black pepper if you like

– Clean the Mussel Shells in water to remove any sand or mud and unwanted things.
– Boil the mussels in turmeric water with a pinch of salt. Make sure the shells partially opens.
– mix ingredient 1 & 2
– Stuff the mussels with the above mixed ingredient 1 & 2
– Steam cook the stuffed mussels for 20-25 minutes with low flame, keep aside to cool.
– Take the mussels out of their shells.
– Heat oil in pan and dip stuffed mussels in this above ingredient 3

Note: for complete list of recipes – please click on recipes
Disclaimer: Some people will be allergenic to certain food products mentioned above – please use your judgment and consult with health experts before you prepare and consume it. We shall not be responsible for the outcome of any recipe anyone try from this website.

Posted on

Recording Jmeter scripts using Jmeter’s HTTP(S) Test Script recorder

How to create Jmeter scripts?

Recording Jmeter scripts using Jmeter’s HTTP(S) Test Script recorder. There are two ways

1)      Manually adding scripts ( Test plan >> Tread Group >> Add>> Sampler >> HTTP Request )

2)      Recording using Jmeter’s HTTP(S) Test Script recorder

How to record Jmeter scripts using HTTP(S) Test Script recorder?

Prior doing that we need to configure browser and learn about the Proxy setup

Jmeter to Application server communication need to be routed through a browser Proxy for this recording purpose. For that you may need to select the Browser (here we can use Firefox browser”

1)      Navigate to Firefox >> Tools >> options >> Advanced >> Network >> Settings

2)      Select Manual Proxy configuration >> HTTP Proxy = localhost & Port = 8080

ff-settings

3)      Once this configuration is made – create Recording controller

Path ==>  Test plan >> Tread Group >> Add>> Logic Controller >> Recording controller

recording-controller

Recording controller will look like as below:

recording-controller-1

4)      Now add the HTTP(S) Test Script recorder

script-recorder

HTTP(S) Test Script recorder will look like as below:

script-recorder-1

Also make sure the URL patterns to be included. I need only .html so added as below,

script-recorder-1

5)      Now click on Start button and type on the Firefox browser with input url name and subsequent actions that you want to consider for performance test recording.

start
Posted on

Jmeter scripts Adding scripts manually

Jmeter scripts Adding scripts manually

Apache JMeter  is a Java based performance testing tool works well on web communication layer (HTTP).

How to create Jmeter scripts?

There are two ways

1)      Manually adding scripts ( Test plan >> Tread Group >> Add>> Sampler >> HTTP Request )

2)      Recording using Jmeter’s HTTP(S) Test Script recorder

How to manually add Jmeter scripts

1         Follow the path :  Test plan >> Tread Group >> Add>> Sampler >> HTTP Request as copied in the below screenshot

script-manual-add

Below the fields needs to be filled when you write a code,

1)      Name: you can give any logical name based on application (e.g Login, Home page etc)

2)      Server Name or IP : it’s nothing but the IP of your server or the url name (www.your test site.com or “your test site.com” as example or if you know the IP, provide the IP)

3)      Path :  is “/sso/auth” in this example screenshot below as the remaining contents in the url after “.com”  – if your original site is www.your test site.com/sso/auth

4)      Make sure the Method è POST and protocol can be HTTP or HTTPS – which ever protocol is used.

http-request

Posted on

Jmeter Performance test scenario

Jmeter Performance test scenario – Creating a Jmeter Performance test scenario

 Thread Group: Thread group is the number of virtual users performing the transaction on application under test.

 How to add Thread group?

 

  1. Right click on the TestPlan
  2. Select Add>Thread Group from the popup.thread-group

How we design the user transactions or thread group?

As per below screenshot –

1)      The requirement shows that number of threads or user actions needed as 60

2)      Ram up time is given as 180 sec

3)      This indicates that a delay of 3 sec between transactions are applied.

This will ensure that the 60th thread or user will be starting the action at 180th sec.

Here this example is selected based on user requirement or to verify performance metrics.

thread-group-values

Posted on

Jmeter Installation steps

Dear visitors .. please go through the link and support fundraising for Team Tara Pai

Jmeter Installation steps

  1. Download JMeter from (http://jmeter.apache.org/download_jmeter.cgi ) è by clicking the on the “apache-jmeter-2.13_src.zip md5 pgp” link (Binaries or Source)
  2. Extract the contents to a folder from ZIP file.
  3. Open the DOS command prompt (Flow: click on Start menu, Type cmd).
  4. In DOS screen – Navigate to the <JmeterHome>\bin directory.

install-4

  1. Type Jmeter.bat in the above mentioned command prompt.  That will bring the Jmeter application ready for performance testing.

install-5

  1. Or click on Jmeter.bat file listed in <JmeterHome>\bin should bring the application.

install-6